user manual
Table Of Contents
- Cisco Content Engine 511 and 566 Hardware Installation Guide
- Contents
- Preface
- Introducing the Content Engine
- Preparing to Install the Content Engine
- Installing the Content Engine
- Installing Hardware Options
- Troubleshooting the System Hardware
- Maintaining the Content Engine
- Index
3-7
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 3 Installing the Content Engine
Installing a CE-511 or CE-566 Unit
Figure 3-5 Removing the Inner Slide Rail
Step 3
Place an inner slide rail at the alignment marker (labeled 1 in Figure 3-6) as
indicated by the arrow on the side of the Content Engine. Use two M4 screws to
secure the inner slide rail to the Content Engine.
Repeat this step to attach the other inner slide rail to the Content Engine.
1 Slide rail assembly 2 Release latch
3 Inner slide rail
83202
1
2
3