user manual

Chapter 1 Introducing the Content Engine
Specifications
1-18
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Fibre Channel adapter • Bus type: Fiber-optic media (shortwave
50-micron)
• Bus transfer rate: 2 gigabits per second (Gbps)
maximum at half duplex and 4 Gbps at full
duplex
• Protocols: Supports FCP
1
-SCSI protocol
MPEG A/V decoder
adapter
Video specifications
• S/N:
2
10 kHz to 4.2 MHz; Y: 65 dB rms
3
;
Pb: 70 dB rms; Pr: 70 dB rms
• Frequency response: 0 to 4.0 MHz ± 2 dB
• Sync tip: 40 IRE
4
± 4
• Luma nonlinearity: 5%
• Audio specifications
• S/PDIF
5
– PCM
6
or compressed audio coding 3 (AC-3)
bitstream out
– 75-ohm, 0.5-V p-p
7
± 20%
– Rise and fall time: > 0.4 microseconds
measured from 10 to 90%
• Analog
– Jumper-selectable balanced or unbalanced
audio (balanced = +4 dBm)
– Frequency response: 20 Hz to 22 kHz ±
0.5 dB
– Reference level: 0.5-V p-p ± 10%
– THD
8
+n:@20 Hz to 22 kHz < 0.5%
Power supply 1 AC-input
Table 1-10 CE-511 and CE-566 Hardware Specifications (continued)
Specification Description