user manual

1-17
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Chapter 1 Introducing the Content Engine
Specifications
Specifications
Table 1-10 summarizes the features and specifications for the CE-511 and
CE-566.
6Red
7 Green
8Ground
Table 1-9 VGA Output Connector Pinout (continued)
Pin Number Destination
Table 1-10 CE-511 and CE-566 Hardware Specifications
Specification Description
Microprocessor 1 Intel 2.8-GHz Celeron 256-KB with Level 2 cache
and multimedia extensions (MMX2) technology
Expansion bays Two 3.5-in. (8.89-cm) slim-height bays for hard
disk drives
Expansion slots Two 66-/100-/133-MHz 64-bit PCI-X slots on the
system board (half-length full-height slots; one
low-profile and one full profile)
Hard disk controller
• CE-511—Serial advanced technology attachment
(ATA) controller
• CE-566—Ultra320 SCSI controller
Adapters
• 1-port Fibre Channel adapter
• 1-port MPEG A/V decoder adapter
Note The CE-511 and CE-566 support either the
Fibre Channel adapter or the MPEG A/V
decoder adapter in PCI slot 1.
• Ultra320 SCSI adapter installed in PCI slot 2
(CE-566 only)