user manual
Table Of Contents
- Cisco Content Engine 511 and 566 Hardware Installation Guide
- Contents
- Preface
- Introducing the Content Engine
- Preparing to Install the Content Engine
- Installing the Content Engine
- Installing Hardware Options
- Troubleshooting the System Hardware
- Maintaining the Content Engine
- Index
Chapter 1 Introducing the Content Engine
Hardware Features
1-14
Cisco Content Engine 511 and 566 Hardware Installation Guide
OL-5756-01
Figure 1-11 Serial Port Connector
SCSI Port
The CE-566 has one SCSI LVD port connector located on the back of the device.
A cable for this port is provided when you purchase a Cisco Storage Array.
When you attach an external SCSI device to the SCSI connector, you must set a
unique ID for the device. Refer to the information that comes with the device for
instructions on how to set its SCSI ID.
SCSI Connector
Figure 1-12 shows a 68-pin, female D-shell SCSI connector. These connectors
conform to the SCSI standard.
Figure 1-12 SCSI Port Connector
Fibre Channel Port
The CE-511 and CE-566 support one optional Fibre Channel adapter that has a
single Fibre Channel port.
1
5
69
83193
34
1
68
35
83192