user manual

E-14
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
AppendixE Configuring the Client Adapter through the Windows XP Operating System
Configuring the Client Adapter
Step 4 Perform one of the following:
• If you chose Protected EAP (PEAP), follow the instructions in the “Enabling PEAP (EAP-MSCHAP
V2)” section below.
• If you chose PEAP, follow the instructions in the “Enabling PEAP (EAP-GTC)” section on
page E-16.
Enabling PEAP (EAP-MSCHAP V2)
Follow the steps below to enable PEAP (EAP-MSCHAP V2).
Step 1 Click Properties. The Protected EAP Properties window appears (see Figure E-8).
Figure E-6 Protected EAP Properties Window
Step 2 Check the Validate server certificate check box if server certificate validation is required
(recommended).