Network Router User Manual

4-21
Cisco ONS 15454 SDH Procedure Guide, R4.6
January 2004
Chapter 4 Turn Up Node
DLP-D67 Provision the IIOP Listener Port on the ONS 15454 SDH
Step 3 Click Apply.
Step 4 When the Change Network Configuration message appears, click Yes.
Both ONS 15454 SDH TCC2s reboot, one at a time. The reboot takes approximately 15 minutes. See
Table 4-1 on page 4-12.
Step 5 Return to your originating procedure (NTP).
Table 4-2 Ports Used by the TCC2 Cards
Port Function
0 Reserved
21 FTP control
23 Telnet
80 HTTP
111 rpc (not used; but port is in use)
513 rlogin (not used; but port is in use)
<=1023 Default CTC listener ports
1080 Proxy server
2001-2017 I/O card telnet
2018 DCC processor on active TCC2
2361 TL1
3082 TL1
3083 TL1
5001 MS-SPRing server port
5002 MS-SPRing client port
7200, 7209, 7210 SNMP input port
9100 EQM port
9101 EQM port 2
9401 TCC2 boot port
9999 Flash manager
57790 Default TCC2 listener port