Computer Hardware User Manual
Table Of Contents
- Command Reference
- Supervisor Console Commands
- Processor Control Commands
- MWAM Console Commands
- Command Details
- mwam module allowed-vlan
- mwam module vlan-based
- session slot
- show mwam module
- mwam bootflash access
- logging listen mwam
- execute-on
- mwam module cpu logging
- show logging
- clear logging slot
- show processor
- show log
- reload
- recover-ios
- normal-ios
- show images
- restore
- show tech-support
- show version
- mwam config-mode
- show mwam config-mode
- logging main-cpu
- show mwam
6-19
Multiprocessor WAN Application Module User Guide
OL-4858-07
Chapter 6 Command Reference
Command Details
clear logging slot
To clear the slave log options that are enabled on the MWAM, use the clear logging slot command in
privileged EXEC mode.
clear logging slot slot_number counts
Syntax Description
Defaults There are no default behavior or values.
Command Modes Privileged EXEC configuration.
Command History
Usage Guidelines Use this command to clear the slave log options that are enabled.
Examples The following example illustrates the clear logging slot command:
router# clear logging slot 6 counts
slot_number Specifies the slot that the module is plugged into.
Release Modification
12.2(14)ZA4 This command was introduced.