User's Manual

Your call history shows the status for all calls on the shared line. For example, if a call rings on a shared line
and you answer the call, your coworkers who share the line will see that the call was answered remotely. Your
call history identifies calls that were Placed, Received, or Missed.
Speed Dial
Speed Dial features allow you to quickly place a call using pre-configured codes to place a call, or by selecting
an item from the Call History list. Before you can use speed dial features on the conference station, you must
set up Speed Dial on your User Options web pages. The conference station allows 10 speed dial entries.
The conference station supports these speed dial features:
•
Speed-dial codes: Allows you to dial a phone number from a code (sometimes referred to as abbreviated
dialing or fast dialing).
Related Topics
Speed Dial setup on Web, on page 70
Place call using speed dial codes
Before You Begin
Before you can use speed dial codes on the conference station, you must set up the codes on your User Options
web pages.
Procedure
To place a call, enter the speed dial code and press the Speed Dial.
Transfer
Transfer allows you to redirect a connected call from the conference station to another number.
Before completing a transfer procedure, you can press the Cancel to cancel the procedure.
Transfer call to another number
Before You Begin
The call must be active to be transferred.
Cisco Unified IP Phone 8831 User Guide for Cisco Unified Communications Manager 9.3
62
Calling Features
Speed Dial