User's Manual
Table Of Contents
- Cisco Unified IP Phone 8831 User Guide for Cisco Unified Communications Manager 9.3
- Contents
- Preface
- Features of your Cisco Unified IP Phone
- Applications
- Contacts
- Messages
- Calling Features
- Softkey feature map
- Answer
- Call Back
- Call Forward
- Call Park
- Call Pickup
- cBarge
- Conference
- Divert
- Do Not Disturb
- Enhanced Room Coverage
- Extension Mobility
- Fast Dial
- Hold
- Hold Reversion
- Meet Me Conference
- Mobile Connect
- Monitoring and Recording
- Multiple calls per line
- Mute
- On-Hook dialing
- Plus Dialing
- Privacy
- Quality Reporting Tool
- Redial
- Shared lines
- Speed Dial
- Transfer
- WebDialer
- User Options web pages
- Additional options
- Troubleshooting
- Cisco one-year limited hardware warranty terms
- INDEX
When you enable Mobile Connect:
•
The conference station and remote destinations receive calls simultaneously.
•
When you answer the call on the conference station, the remote destinations stop ringing, disconnect,
and display a missed call message.
•
When you answer the call on one remote destination, the other remote destinations and the conference
station stop ringing, are disconnected, and a missed call message is shown on the other remote destinations.
Enable Mobile Connect
Procedure
Step 1
Press More.
Step 2
Press Mobility to display the current remote destination status (Enabled or Disabled).
Step 3
Press Select to change the status.
Step 4
Press Exit.
Switch IP phone call to mobile phone
Procedure
Step 1
Press More.
Step 2
Press Mobility.
Step 3
Select To mobile.
Step 4
Answer the in-progress call on your mobile phone.
You cannot use the conference station for any other calls while this call is still in progress.
The Call button LED is solid red, and the calling party number appear on the phone display.
Cisco Unified IP Phone 8831 User Guide for Cisco Unified Communications Manager 9.3
55
Calling Features
Enable Mobile Connect