User's Manual

Table Of Contents

If a microphone is already linked to a particular channel, pairing cannot be initiated on the selected channel

and the dialog shows that the microphone is linked.

Step 3

Press Pair.

If the channel is ready to pair, the pairing process begins and a text message is displayed.

Step 4

Put the microphone that corresponds to the selected channel in pairing mode by pressing its Mute button until

the LED is solid red.

If pairing is successful the screen will revert to the Wireless Microphones Menu, and the message: Mic X

Paired Successfully! is displayed.

If pairing timed out or failed, the status is updated and you can cancel or retry.

Step 5

Press Cancel to revert to the wireless microphones menu.

Step 6

Press Retry to start the pairing process again.

Related Topics

Unpair wireless microphone, on page 50

Unpair wireless microphone

If you need to connect a wired microphone to the conference station, any wireless microphones must be

unpaired first. You can also use this procedure to unpair a microphone that is no longer in use.

This option is not available if the microphone is connected. To enable the unpair command, place the

wireless microphone in its charger or turn it off.

Note

Procedure

Step 1

Choose Applications > Admin Settings > Wireless Microphones.

Step 2

Select either Wireless Microphone 1 or Wireless Microphone 2.

If the selected channel is paired, the Unpair softkey is available.

Step 3

Press Unpair.

A verification prompt with the options to Cancel or Unpair is displayed.

Step 4

Press Unpair to continue to unpair the microphone.

The microphone channel's registration information in the base is deleted. If the microphone channel's status

if viewed in phone info menu the status value and RFID will be empty.

Step 5

Press return to revert to the wireless microphones menu and stop the process.