User's Manual

◦
Allow calls placed from the call forward target number to the conference station to ring through,
rather than be forwarded.
◦
Prevent you from creating a call forward loop or exceeding the maximum number of links in a call
forwarding chain.
Forward calls
Procedure
Step 1
Press Fwd All.
Step 2
Enter the target phone number.
Depending on how your voicemail system is set up, you may be able to press Msgs to forward all calls to
voicemail.
A visual confirmation is displayed the screen while call forwarding is active.
Step 3
To cancel call forwarding, press Fwd OFF.
Step 4
To forward calls remotely, or to set conditions on fall forwarding, go to your User Options Web pages.
Call Park
Call Park allows you to use the conference station to park (temporarily store) a call. The parked call can be
retrieved from another phone in the Cisco Unified Communications Manager system, such as a phone at a
coworker’s desk or in a conference room.
The parked call is retrieved by entering the parking number for the call into another phone in the Cisco Unified
Communications Manager system.
Your system administrator sets up the parking number for the conference station.
Park call
Procedure
Step 1
During a call, press the Park.
The conference station screen displays the call park number where the system stored your call.
Step 2
Note the call park number displayed on the screen. This number is used to retrieve the call.
You have a limited time to retrieve a parked call before it reverts to ringing at the original number.
Step 3
From any other Cisco Unified IP Phone or Conference Station in your network, enter the call park number to
retrieve the call.
Cisco Unified IP Phone 8831 User Guide for Cisco Unified Communications Manager 9.3
43
Calling Features
Forward calls