Switch User's Manual

Table Of Contents

Regulatory Compliance and Safety Information for the Cisco ME 6500 Series Ethernet Switch

78-17361-02

Optional Cautions

This section includes additional cautions that might apply to your products.

GR-1089-Core Intrabuilding Lightning—Immunity Requirements

Caution To comply with GR-1089-Core intrabuilding lightning-immunity requirements, you must use shielded

(screened) cable that is grounded at both ends.

GR-1089 Intrabuilding AC Power Fault Requirements

Warning

The intrabuilding port(s) of the equipment or subassembly is suitable for connection to intrabuilding

or unexposed wiring or cabling only. The intrabuilding port(s) of the equipment or subassembly must

not be metallically connected to interfaces that connect to the Outside Plant (OSP) or its wiring.

These interfaces are designed for use as intrabuilding interfaces only (Type 2 or Type 4 ports as

described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. The addition

of Primary Protectors is not sufficient protection to connect these interfaces metallically to OSP

wiring.

Obtaining Documentation

Cisco documentation and additional literature are available on Cisco.com. This section explains the

product documentation resources that Cisco offers.

Cisco.com

You can access the most current Cisco documentation at this URL:

http://www.cisco.com/techsupport

You can access the Cisco website at this URL:

http://www.cisco.com

You can access international Cisco websites at this URL:

http://www.cisco.com/public/countries_languages.shtml