Switch User's Manual
Table Of Contents
- Regulatory Compliance and Safety Information for the Cisco ME 6500 Series Ethernet Switch
- Translated Safety Warnings
- Statement 17-Overtemperature Warning
- Statement 37-Restricted Area Warning
- Statement 39-Grounded Equipment Warning
- Statement 43-Jewelry Removal Warning
- tatement 48-Stacking the Chassis Warning
- Statement 148-Installation Warning
- Statement 171-Ethernet Cable Shielding in Offices
- Statement 258-Fan Tray Removal Warning
- Statement 322-DC Power Off Warning
- Statement 1001-Work During Lightning Activity
- Statement 1004-Installation Instructions
- Statement 1006-Chassis Warning for Rack-Mounting and Servicing
- Statement 1008-Class 1 Laser Product
- Statement 1012-Laser Beam Exposure
- Statement 1017-Restricted Area
- Statement 1030-Equipment Installation
- Statement 1040-Product Disposal
- Statement 1045-Short-Circuit Protection
- Statement 1046-Installing or Replacing the Unit
- Statement 1051-Laser Radiation
- Statement 1074-Comply with Local and National Electrical Codes
- Statement 1075-Hazardous Voltage or Energy Present on DC Power Terminals
- European Directives
- California Perchlorate Contamination Prevention Act (Title 22, California Code of Regulations, Chapter 33)
- Standards Compliance
- EMC Environmental Conditions for Products Installed in the European Union
- EMC Class A Notices and Warnings
- Optional Cautions
- Obtaining Documentation
- Documentation Feedback
- Cisco Product Security Overview
- Product Alerts and Field Notices
- Obtaining Technical Assistance
- Obtaining Additional Publications and Information
- Translated Safety Warnings
36
Regulatory Compliance and Safety Information for the Cisco ME 6500 Series Ethernet Switch
78-17361-02
Standards Compliance
Standards Compliance
This section includes all regulatory, safety, EMC (Class A or Class B), telecom, and NEBS standards.
The Cisco ME 6500 series Ethernet switch is in compliance with national and international standards as
described in Table 1.
Table 1 Standards Compliance
Specification Description
Regulatory Compliance Products with the CE Marking indicate compliance with the
89/336/EEC and 73/23/EEC directives, which include the
safety and EMC standards listed.
Safety UL 60950-1
CAN/CSA-C22.2 No. 60950-1
EN 60950-1
IEC 60950-1
AS/NZS 60950-1
EMC 47CFR Part 15 Class A or B (FCC Regulations)
AS/NZS CISPR22 Class A
CISPR22 Class A
EN55022 Class A
ICES003 Class A
VCCI Class A
EN50082-1
EN55024
EN300386
EN61000-3-2
EN61000-3-3
EN300386
CISPR24
EN 61000-6-1
Telecom (E1) CTR12 (97/520/EC)
CTR13 (97/521/EC)
TNA 117
IDA TS DCLN1
Jate Green Book
Telecom (T1) EIA/TIA-968-A
IC CS-03
ID002
Jate Green Book