Network Device Installation Guide

Send documentation comments to [e-mail].
Contents
vi
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Requirements Specific to Perforated Cabinets C-3
Perforated Cabinet Requirements for the Cisco MDS 9513 Chassis C-3
Perforated Cabinet Requirements for the Cisco MDS 9509 and the Cisco MDS 9506
Chassis
C-3
Requirements Specific to Solid-Walled Cabinets C-4
Solid-Walled Cabinet Requirements for the Cisco MDS 9513 Chassis C-4
Solid-Walled Cabinet Requirements for the Cisco MDS 9509 and the Cisco MDS 9506
Chassis
C-5
Requirements Specific to Standard Open Racks C-5
Requirements Specific to Two-Post Telco Racks C-6
Cisco MDS 9000 Family Telco and EIA Shelf Bracket C-6
Rack-Mounting Guidelines C-7
Before Installing the Rack-Mount Support Brackets C-7
Before Installing the Shelf Brackets C-8
Required Equipment C-8
Installing the Shelf Bracket Kit into a Two-Post Telco Rack C-9
Installing the Shelf Bracket Kit into a Four-Post EIA Rack C-10
Installing the Switch on the Rack-Mount Support Brackets C-11
Installing the Switch on the Shelf Brackets C-12
Removing the Shelf Bracket Kit (Optional) C-12
Cisco MDS 9500 Shelf Bracket C-13
Rack-Mounting Guidelines C-14
Before Installing the Shelf Brackets C-14
Required Equipment C-14
Installing the Cisco MDS 9500 Shelf Bracket Kit into a Cabinet or Rack C-15
Installing the Switch on the Shelf Brackets C-16
APPENDIX D Technical Specifications D-1
Switch Specifications D-1
Module Specifications D-4
Weight of Modules D-5
Power Specifications for the Cisco MDS 9513 Director D-6
Specifications for the Cisco MDS 9513 Power Supplies D-6
Component Power Requirements and Heat Dissipation for the Cisco MDS 9513 Director D-7
AC Power Consumption for the Cisco MDS 9513 Director D-8
Power Specifications for the Cisco MDS 9509 Director D-9
Specifications for the Cisco MDS 9509 Power Supplies D-9
Component Power Requirements and Heat Dissipation for the Cisco MDS 9509 Director D-11
AC Power Consumption for the Cisco MDS 9509 Director D-14