Network Device Installation Guide

Send documentation comments to [e-mail].
Contents
iv
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Maintaining a Caching Services Module 2-50
Maintaining the Batteries on the Caching Services Module 2-50
Maintaining the Disk Drives on the Caching Services Module 2-51
Removing and Installing a Power Supply or PEM 2-51
Removing and Installing the Power Supplies on the Cisco MDS 9513 Director 2-52
Removing an AC Power Supply from the Cisco MDS 9513 Director 2-52
Installing an AC Power Supply in the Cisco MDS 9513 Director 2-54
Removing an AC Power Supply from the Cisco MDS 9509 Director 2-56
Installing an AC Power Supply in the Cisco MDS 9509 Director 2-57
Removing a DC Power Supply from the Cisco MDS 9509 Director 2-61
Installing a DC Power Supply in the Cisco MDS 9509 Director 2-62
Removing and Installing the PEMs on the Cisco MDS 9506 Director 2-64
Removing an AC PEM 2-64
Removing a DC PEM 2-64
Installing an AC PEM 2-66
Installing a DC PEM 2-66
Removing an AC or DC Power Supply from the Cisco MDS 9506 Director 2-67
Installing an AC or DC Power Supply in the Cisco MDS 9506 Director 2-67
Removing and Installing Fan Modules 2-68
Removing a Front Fan Module on the Cisco MDS 9513 Director 2-69
Installing a Front Fan Module on the Cisco MDS 9513 Director 2-70
Removing the Crossbar Module Fan Tray 2-71
Installing the Crossbar Module Fan Tray 2-72
Removing a Front Fan Module on the Cisco MDS 9509 Director 2-73
Installing a Front Fan Module on the Cisco MDS 9509 Director 2-73
Removing a Front Fan Module on the Cisco MDS 9506 Director 2-74
Installing a Front Fan Module on the Cisco MDS 9506 Director 2-74
Removing and Installing CompactFlash Cards 2-75
Removing a CompactFlash Card 2-75
Installing a CompactFlash Card 2-76
Removing and Installing Clock Modules 2-76
Removing a Clock Module from the Cisco MDS 9513 Director 2-77
Installing a Clock Module into the Cisco MDS 9513 Director 2-79
Removing a Clock Module from the Cisco MDS 9509 Director 2-80
Installing a Clock Module into the Cisco MDS 9509 Director 2-83
Removing a Clock Module from the Cisco MDS 9506 Director 2-83
Installing a Clock Module into the Cisco MDS 9506 Director 2-86