Network Device Installation Guide

Send documentation comments to [e-mail].
Index
IN-8
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
memory options 1-22
nondisruptive restart 1-21
processor 1-22
redundant central arbiter 1-21
support (note) 1-21
warm switchover 1-22
Supervisor-2
Ethernet port B-6
Supervisor-2 modules
CompactFlash cards 1-19
CompactFlash cards LEDs 1-19
control and management 1-18
description 1-17
features 1-17
figure 1-17
integrated crossbar switching fabric 1-17
LEDs 1-19
LEDs (figure) 1-19
LEDs (table) 1-20
LEDs description 1-19
memory options 1-18
nondisruptive restart 1-18
port interfaces 1-18
processor 1-18
redundant central arbiter 1-18
warm switchover 1-18
supervisor module
port interfaces 1-22
supervisor modules
description 1-16
installing 2-38, 2-40
removing 2-39
specifications D-4
switching modules
12-port 4-Gbps Fibre Channel switching
modules
1-35
16-port 2-Gbps Fibre Channel (figure) 1-38
24-port 4-Gbps Fibre Channel switching
modules
1-35
24-port 8-Gbps Fibre Channel switching
modules
1-33
32-port 2-Gbps Fibre Channel (figure) 1-37
4/44-port 4-Gbps Host-Optimized Fibre Channel
switching modules
1-33
48-port 4-Gbps Fibre Channel switching
modules
1-34
48-port 8-Gbps Fibre Channel switching
modules
1-33
4-port 10-Gbps Fibre Channel switching
modules
1-36
description 1-32
downloading binary image 1-48, 1-50
features 1-39
Generation 1 modules 1-32
Generation 2 modules 1-32
Generation 3 modules 1-32
installing 2-38, 2-45
LEDs (table) 1-37, 1-40
removing 2-45
specifications D-4
system grounding 2-17
T
Telco racks (requirements) C-6
transceivers
description 1-55
supported SFP transceivers 1-55
supported X2 transceiver 1-55
troubleshooting
contacting customer service F-1
W
weight of modules D-5
X
X2 transceivers