Network Device Installation Guide

Send documentation comments to [e-mail].
Index
IN-7
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
supervisor modules 2-39
switching modules 2-45
X2 transceivers B-11
S
SAN extension 1-41
serial number
location (MDS 9506 Director) F-3
location (MDS 9509 Director) F-2
location (MDS 9513 Director) figure F-2
services modules
ASM 1-48
CSM 1-52
description 1-41
Generation 1 modules 1-41
installing 2-38, 2-45
IPS modules 1-46
MPS-14/2 module 1-44
MSFM-18/4 module 1-42
MSM-18/4 module 1-41
removing 2-45
specifications D-4
SSM 1-50
SFP and SFP+ transceivers
specifications D-22
SFP transceivers
cabling B-14, B-15
CWDM 1-56, D-30
description 1-56, B-12, D-22
DWDM 1-57, D-34
Fibre Channel 1-56
Fibre Channel/Gigabit Ethernet 1-56
Fibre Channel/Gigabit Ethernet supported D-28
Fibre Channel specifications D-23
Fibre Channel supported D-23
Gigabit Ethernet 1-56
installing B-14
latches supported B-12
removing B-12
shelf bracket
Cisco MDS 9500, installation C-13
installing Telco/EIA C-6
shelf brackets
description C-13
site planning preparation checklist F-4
specifications
airflow D-4
cables E-1
environmental D-1
heat dissipation for Cisco MDS 9506 Director D-16
heat dissipation for Cisco MDS 9509 Director D-7,
D-11
MDS 9513 Director D-6
modules D-4
physical (MDS 9506 Director) D-3
pinouts E-1
power, MDS 9506 Director D-14
power, MDS 9509 Director D-6, D-9
SFP and SFP+ transceivers D-22
SSM
alarm LEDs 1-50
description 1-50
figure 1-50
LEDs (table) 1-51
power-on LEDs 1-50
ready LEDs 1-50
self-test passed LEDs 1-50
self-test running LEDs 1-50
Supervisor-1 modules
CompactFlash cards 1-23
control and management 1-21
Ethernet port B-7
features 1-21
figure 1-21
LEDs 1-23
LEDs (figure) 1-23
LEDs (table) 1-23