Network Device Installation Guide

Send documentation comments to [e-mail].
Index
IN-4
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
G
Genaration 3 Modules
Installing the MDS 9000 4/44-Port 8-Gbps
Host-Optimized Module
A-3
Generation 1 modules
services modules 1-41
switching modules 1-32
Generation 2 modules
switching modules 1-32
Generation 3 modules
switching modules 1-32
Gigabit Ethernet/Fibre Channel SFP transceiver
specifications
D-28
grounding
attaching the ESD wrist strap 2-19
best practices 2-17
chasis 2-23
establishing the system ground 2-22
required tools and equipment 2-22
H
hardware compatibility matrix (table) 1-27
heat dissipation
Cisco MDS 9506 Director D-16
Cisco MDS 9509 Director D-7, D-11
high availability
features 1-1
I
IBM BladeCenter 1-9
installing
chassis (MDS 9506 Director) 2-2
chassis (MDS 9509 Director) 2-2
chassis (MDS 9513 Director) 2-2
CompactFlash cards 2-76
crossbar modules 2-48
EIA shelf brackets C-6
equipment required 2-5
guidelines 2-3
power supplies (Cisco MDS 9513 Director 2-54
power supplies (MDS 9509 Director) 2-57, 2-62
rack mount brackets C-11
rack-mounting guidelines C-7
services modules 2-38
SFP transceiver cables B-15
SFP transceivers (note) B-13
shelf brackets C-12
supervisor modules 2-38, 2-40
switching modules 2-38
Telco shelf brackets C-6
X2 transceivers B-11
installing SFP transceivers B-14
IPS modules
IPS-4 modules (figure) 1-47
IPS-4 modules, description 1-46
IPS-8 modules, description 1-46
IPS-8 modules, figure 1-46
LEDs (table) 1-47
IP Storage Services module. See IPS modules
IPv6 1-41
L
LC-type cables
connecting to Fibre Channel ports B-15
figure B-15
LEDs
ASM (table) 1-49
clock modules 1-8, 1-16
CSM (table) 1-54
fan modules 1-16
IPS modules (table) 1-47
MDS 9513 Director power supplies (table) 1-11
MPS-14/2 (table) 1-43, 1-45
Supervisor-2 modules (table) 1-20