Network Device Installation Guide

Send documentation comments to [e-mail].
Index
IN-2
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
C
cabinet installation guidelines 2-2
cabinets
perforated, requirements C-3
requirements C-1
See also racks
solid wall requirements C-4
space requirements C-2
cabling
COM1 port E-3
console port E-2
MGMT 10/100/1000 Ethernet port E-4
MGMT 10/100 Ethernet port E-6
requirements B-2
SFP transceivers B-14, B-15
Caching Services Module. See CSM
chassis
grounding 2-23
installing guidelines 2-3
unpacking 2-5
chassis (MDS 9506 Director)
description 1-7
features 1-7
figure 1-7
grounding (figure) 2-27
installing in a rack (procedure) 2-15
preinstallation 2-2
serial number location F-3
chassis (MDS 9509 Director)
description 1-6
features 1-6
figure 1-6
grounding 2-26
installing in a rack (procedure) 2-11
power supplies 2-11
preinstallation 2-2
serial number location F-2
chassis (MDS 9513 Director)
description 1-3
features 1-3
figure 1-4, 1-5
installing in a rack (procedure) 2-7
power supplies 1-10, 2-7, 2-28
preinstallation 2-2
serial number location F-2
Cisco MDS 9500 Series Multilayer Directors
description 1-1
Cisco MDS Fabric Switch 1-9
clock modules
description 1-8, 2-76
installing (MDS 9506 Director) 2-86
installing (MDS 9509 Director) 2-83
installing (MDS 9513 Director) 2-79
installing in MDS 9506 Director (procedure) 2-86
installing in MDS 9509 Director (procedure) 2-79,
2-83
removing (MDS 9506 Director) 2-84
removing (MDS 9509 Director) 2-80
removing (MDS 9513 Director) 2-76, 2-77
removing from MDS 9506 Director (procedure) 2-83
removing from MDS 9509 Director (procedure) 2-77,
2-80
COM1 port
cabling E-3
connecting B-4
pinouts (table) E-3
support B-4
support (note) B-4
CompactFlash cards
installing 2-76
LED on supervisor module 1-23
removing 2-75
Supervisor-1 modules 1-23
Supervisor-2 modules 1-19
Supervisor-2 modules, LEDs 1-19
connecting
COM1 port B-4