Network Device Installation Guide

Send documentation comments to mdsfeedback-doc@cisco.com.
E-10
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix E Cable and Port Specifications
Supported Power Cords and Plugs
Figure E-6 shows an additional plug that is supported for the 1900-W AC power supply only.
Figure E-6 Additional Power Supply Plug Supported for 1900-W Only
Figure E-7 shows an additional plug that is supported for the 3000-W and 2500-W power supply, using
110 VAC.
Note Using the plug in Figure E-7 at 110 VAC results in 1300 W available to the system.
Figure E-7 Additional Power Supply Plug Supported for 3000-W and 2500-W 110 VAC Only
1 United Kingdom
BS89/13, BS 1363/A
(13 A; replaceable fuse)
113147
1 NEMA 5-20P
North American power cord product ID: CAB-7513AC
110 VAC (20 A)
113168