Network Device Installation Guide

Send documentation comments to [e-mail].
D-34
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D Technical Specifications
SFP and SFP+ Transceiver Specifications
• When interoperating a Cisco 4-Gbps CWDM SFP transceiver with a Cisco 1/2-Gbps CWDM
transceiver, the speed of ports on the Cisco 4-Gbps CWDM SFP transceiver must be manually
configured to 1-Gbps or 2-Gbps.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco Gigabit Ethernet Transceivers
A 1-Gbps Gigabit Ethernet SFP transceiver is provided on the Cisco MDS 9000 IPS modules.
Table D-48 lists the transceiver supported on the Cisco MDS 9216.
Note DS-SFP-GE-T is not supported on Cisco MDS 9222.
General Specifications for Cisco Gigabit Ethernet Transceivers
Table D-49 provides the general specification for the Cisco Gigabit Ethernet SFP transceiver.
Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers
Table D-50 provides the environmental specifications for the Cisco Gigabit Ethernet transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco DWDM SFP Transceivers
The Cisco 2-Gbps DWDM SFP modules enable enterprises and service providers to provide scalable,
easy-to-deploy DWDM Fibre Channel services in their networks.
Ta b l e D-48 Cisco Gigabit Ethernet SFP Transceivers
Transceiver Module Product Number Description
DS-SFP-GE-T 1-Gbps Ethernet SFP
Ta b l e D-49 General Specification for the Cisco Gigabit Ethernet SFP Transceivers
SFP Cable Type Cable Distance
DS-SFP-GE-T Category 5 UTP 100 m (328 ft)
Ta b l e D-50 Environmental Specifications for Cisco Gigabit Ethernet Transceivers
SFP
Operating Storage
Maximum Minimum Maximum Minimum
DS-SFP-GE-T 40°C 0°C 85°C -40°C