Network Device Installation Guide

Send documentation comments to [e-mail].
D-21
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D Technical Specifications
X2 Transceiver Specifications
Note DS-X2-FC10G-CX4 is not an optical module; therefore, it is not listed in Table D-21.
Table D-22 provides the environmental specifications for the Cisco 10-Gbps Fibre Channel X2
transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco 10-Gbps Ethernet X2 Transceivers
Table D-23 lists the Cisco 10-Gbps Ethernet X2 transceivers.
General Specification for Cisco 10-Gbps Ethernet X2 Transceivers
Table D-24 provides the general specifications for Cisco 10-Gbps Ethernet X2 transceivers.
Note The minimum cable distance for the MMF transceiver listed above is 2 meters (6.5 feet).
Ta b l e D-22 Environmental Specifications for the Cisco 10- Gbps Fibre Channel X2 Transceivers
X2 Operating Storage
Maximum Minimum Maximum Minimum
DS-X2-FC10G-SR 40°C 0°C 85°C -40°C
DS-X2-FC10G-LR 40°C 0°C 85°C -40°C
DS-X2-FC10G-ER 40°C 0°C 85°C -40°C
DS-X2-FC10G-CX4 40°C 0°C 85°C -40°C
Ta b l e D-23 Cisco 10-Gbps Ethernet X2 Transceivers
Transceiver Module
Product Number
Description Type
DS-X2-E10G-SR 10-Gbps Ethernet Short Reach, X2, SC Short reach
Ta b l e D-24 General Specifications for the Cisco 10-Gbps Ethernet X2 Transceivers
X2
Wavelength
(nanometer) Fiber Type
Core Size
(micon)
Baud Rate
(GBd) Cable Distance
DS-X2-E10G-SR 850 MMF 62.5 10.312 33 (108 ft)
50.0 10.312 300 (984 ft)