Network Device Installation Guide

Send documentation comments to [e-mail].
D-19
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D Technical Specifications
X2 Transceiver Specifications
AC Power Consumption for the Cisco MDS 9506 Director
Table D-18 shows the typical AC power consumption for the Cisco MDS 9506 Director.
X2 Transceiver Specifications
The Cisco MDS 9500 Series is compatible with X2 transceivers and cables that have SC connectors.
Each transceiver must match the transceiver on the other end of the cable in terms of wavelength, and
the cable must not exceed the stipulated cable length for reliable communications.
Use only Cisco X2 transceivers on the Cisco MDS 9500 Series Switches. Each Cisco X2 transceiver is
encoded with the model information that enables the switch to verify that the SFP transceiver meets the
requirements for the switch.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Ta b l e D-18 Typical AC Power Consumption for a Cisco MDS 9506 Director
Module Type / Product Number Typical AC Power Consumption (Watts)
Cisco MDS 9506 chassis, DS-C9506, with fan module, and
two Supervisor-2 (DS-X9530-SF2-K9)
395
Cisco MDS 9506 chassis, DS-C9506, with fan module, and
two Supervisor-1 (DS-X9530-SF1-K9)
624
48-port 4-Gbps switching module, DS-X9148 181
24-port 4-Gbps switching module, DS-X9124 127
12-port 4-Gbps switching module, DS-X9112 107
4-Port 10-Gbps switching module, DS-X9704 162
32-port 1-Gbps/2-Gbps Fibre Channel module, DS-X9032 174
16-port 1-Gbps/2-Gbps Fibre Channel module, DS-X9016 144
MPS-14/2 module, DS-X9302-14K9 178
32-port SSM, DS-X9032-SSM 211
8-port IPS module, DS-X9308-SMIP 175
4-port IPS module, DS-X9304-SMIP 128
48-port 8-Gbps switching module, DS-X9248-96K9 230
24-port 8-Gbps switching module, DS-X9224-96K 221
4/44-port 8-Gbps Host-Optimized switching module,
DS-X9248-48K9
175