Network Device Installation Guide

Send documentation comments to [e-mail].
D-18
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D Technical Specifications
Power Specifications for the Cisco MDS 9506 Director
Supervisor/fabric 1
DS-X9530-SF1
3.x 210 956 5.83 4.67
2.x and 1.x 220 1000 6.10 4.88
32-port 1-Gbps/2-Gbps
Fibre Channel module
DS-X9032
3.x 191 869 5.31 4.24
2.x and 1.x 200 911 5.56 4.45
16-port 1-Gbps/2-Gbps
Fibre Channel module
DS-X9016
3.x 210 956 5.83 4.67
2.x and 1.x 220 1000 6.10 4.88
18/4 Multiservice
module,
DS-X9304-18K9
3.2.(1) 200 855 2.78 2.08
MPS-14/2 module
DS-X9302-14K9
3.x 200 910 5.56 4.44
2.x and 1.x 227 970 3.15 2.37
8-port IPS module
DS-X9308-SMIP
3.x 200 910 5.56 4.44
2.x and 1.x 220 1000 6.10 4.88
4-port IPS module
DS-X9304-SMIP
3.x 160 728 4.44 3.56
2.x and 1.x 185 841 5.14 4.11
32-port SSM
DS-X9032-SSM
3.x 281 1279 7.81 6.24
2.x and 1.x 295 1342 8.19 6.56
32-port ASM
DS-X9032-SMV
3.x 281 1279 7.81 6.24
2.x and 1.x 295 1342 8.19 6.56
CSM
DS-X9560-SMC
3.x 200 910 5.56 4.44
2.x and 1.x 210 955 5.83 4.66
Table D-17 Power Requirements and Heat Dissipation for the 1900-W DC Power Supply (continued)
Module Type/
Product Number SAN-OS Release
Power
Required
(watts)
Heat
Dissipation
(BTU/hr)
Input Current
48 VDC (amps) 60 VDC (amps)