Network Device Installation Guide

Send documentation comments to [e-mail].
D-10
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D Technical Specifications
Power Specifications for the Cisco MDS 9509 Director
Current rating 16 A maximum at 100 to 120 VAC and 1300-W output.
16 A maximum at 200 to 240 VAC and 2500-W output.
Note For current ratings of plugs, see Figure E-5 on page E-9.
Frequency 50 to 60 Hz (nominal) (±3 Hz for full range).
Output capacity 1325 W maximum (100 to 120 VAC ) .
2525 W maximum (200 to 240 VAC ) .
Output voltage at 110/120 3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 27.5 A.
Output voltage at 200/240 3.3 V at 1 5 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A.
2500-W DC Power Supply
Vo l ta g e -48 VDC to -60 VDC continuous.
Current rating 70 A at -48 VDC; 55 A at -60 VDC; 80 A at -40.5 VDC.
Terminal block Accommodates 2 to 14 AWG copper conductors. Use 90°C
copper conductors for North American installations.
Note Actual size of the wire required is determined by the
installer or local electrician. Terminal block material is
rated at 302°F (150°C).
Output capacity 2525 W maximum (-48 to -60 VDC).
Output voltage 3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 55.5 A.
3000-W AC Power Supply
Type Autoranging input with power factor corrector.
Vo l ta g e 100 to 240 VAC (±10%).
Current rating 17.6 A maximum at 100 to 120 VAC and 1400-W output.
17.6 A maximum at 200 to 240 VAC and 3000-W output.
For current ratings of plugs, see Figure E-5 on page E-9
Frequency 50 to 60 Hz (nominal) (±3 Hz for full range).
Output capacity 1400 W maximum (100 to 120 VAC ) .
3000 W maximum (200 to 240 VAC ) .
Output voltage at 110/120 3.3 V at 15 A; 12 V at 12 A; 42 V at 27.9 A.
Output voltage at 200/240 3.3 V at 1 5 A; 12 V at 12 A; 42 V at 66 A.
4000-W AC Power Supply
Type High-line input with power factor corrector, 220 VAC,
single-phase circuit.
Vo l ta g e 200 to 240 VA C ( ± 1 0 % ) .
Current rating 23 A
Note For current ratings of plugs, see Figure E-8 on page E-11.
Frequency 50/60 Hz (nominal) (±3% for full range).
Output capacity 4000 W maximum.
Output voltage at 200/240 3.3 V at 15 A; 5 V at 5 A; 12 V at 12 A; 42 V at 91.2 A
Table D-11 Specifications for Cisco MDS 9509 Power Supplies (continued)
Description Specification