Network Device Installation Guide
Send documentation comments to mdsfeedback-doc@cisco.com.
D-9
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix D Technical Specifications
Power Specifications for the Cisco MDS 9509 Director
Power Specifications for the Cisco MDS 9509 Director
This section includes the following topics:
• Specifications for the Cisco MDS 9509 Power Supplies, page D-9
• Component Power Requirements and Heat Dissipation for the Cisco MDS 9509 Director, page D-11
• AC Power Consumption for the Cisco MDS 9509 Director, page D-14
Specifications for the Cisco MDS 9509 Power Supplies
The 3000-W AC power supply provides power based upon the input voltage, as follows:
• Maximum of 1400 W at input of 100 to 120 VAC (1174 W available to modules and fans)
• Maximum of 3000 W at input of 200 to 240 VAC (2774 W available to modules and fans)
The 2500-W AC power supply provides power based upon the input voltage, as follows:
• Maximum of 1325 W at input of 100 to 120 VAC (1150 W available to modules and fans)
• Maximum of 2525 W at input of 200 to 240 VAC (2331 W available to modules and fans)
If a 110-VAC input is chosen, a 110-VAC power cord (CAB-7513AC=) must be ordered separately.
Table D-11 lists the specifications for the Cisco MDS 9509 power supplies.
Ta b l e D-10 Typical AC Power Consumption for a Cisco MDS 9513 Director
Module Type / Product Number Typical AC Power Consumption (Watts)
Cisco MDS 9513 chassis, DS-C9513, with front
(DS-13SLT-FAN-F) and rear (DS-13SLT-FAN-R) fan trays,
two Supervisor-2 (DS-X9530-SF2-K9), and two crossbar
modules (DS-13SLT-FAB1 or DS-13SLT-FAB2)
697
48-port 4-Gbps switching module, DS-X9148 181
24-port 4-Gbps switching module, DS-X9124 127
12-port 4-Gbps switching module, DS-X9112 107
4-Port 10-Gbps switching module, DS-X9704 162
48-port 8-Gbps switching module, DS-X9248-96K9 230
24-port 8-Gbps switching module, DS-X9224-96K 221
4/44-port 8-Gbps Host-Optimized switching module,
DS-X9248-48K9
175
Ta b l e D-11 Specifications for Cisco MDS 9509 Power Supplies
Description Specification
2500-W AC Power Supply
Type Autoranging input with power factor corrector.
Vo l ta g e 100 to 240 VAC (±10%).