Network Device Installation Guide

Send documentation comments to [e-mail].
B-10
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Chapter B Connecting the Cisco MDS 9500 Series
Connecting to a Fibre Channel Port
The Cisco MDS 9000 Family supports X2 transceivers with SC connectors. (See Figure B-5.)
Figure B-5 Cisco MDS 9000 Family X2 Transceivers
1 Transmit optical bore 6 Module connector
2 Receive optical bore 7 Latch (extended)
3 Latching sleeve (retracted) 8 Latching sleeve (extended)
4 EMI gasket 9 Latch (retracted)
5 Transceiver heat sink
5
6
120754
4
3
8
1
2
7
9
Latching sleeve retracted;
latch extended
Latching sleeve extended;
latch retracted