Network Device Installation Guide

Send documentation comments to [e-mail].
A-13
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Appendix A Migrating to Generation 3 8-Gbps Fibre Channel Switching Modules
Migration Procedure for the MDS 9509 Director and MDS 9506 Director
Step 5 Install Supervisor-2 modules according to the instructions in the “Installing Supervisor Modules”
section on page 2-40. Refer to the Migrating from Supervisor-1 Modules to Supervisor-2 Modules
procedure described in the MDS 9000 Family CLI Configuration Guide.
Step 6 Upgrade to Cisco NX-OS 4.1(1b). Refer to the upgrade procedure described in the MDS 9000 Family
CLI Configuration Guide.
Step 7 Install any Generation 3 8-Gbps module.
Step 8 Refer to the Cisco MDS 9000 Family CLI Configuration Guide or Cisco MDS 9000 Family Fabric
Manager Configuration Guide for information on how to configure a Generation 3 8-Gbps module.