Network Device Installation Guide

Send documentation comments to [e-mail].
2-21
Cisco MDS 9500 Series Hardware Installation Guide
OL-17467-02
Chapter 2 Installing the Cisco MDS 9500 Series
System Grounding
Figure 2-10 Attaching the ESD Wrist Strap to the System Ground Lug Screw
c. In addition, follow these guidelines when handling modules:
– Handle carriers by available handles or edges only; avoid touching the printed circuit boards or
connectors.
– Place a removed component board-side-up on an antistatic surface or in a static shielding
container. If you plan to return the component to the factory, immediately place it in a static
shielding container.
1 ESD ground strap 4 Clip installed (behind screw)
2 Clip and grounding lug 5 System ground connector
3 Side view of grounding lug (clip slid behind
screw)
133947
2
1
3
5
4
2 pt