- Cisco Network Router User's Manual

4-9
Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1
OL-24002-01
Chapter 4 Installing the IPS 4260
Specifications
Table 4-3 lists the power supply indicator.
Specifications
Table 4-4 lists the specifications for the IPS 4260.
Table 4-3 Power Supply Indicators
Color Description
Off No AC power to all power supplies.
Green solid Output on and ok.
Green blinking AC present, only 5Vsb on (power supply off).
Amber No AC power to this power supply (for 1+1 configuration)
or
power supply critical event causing a shutdown: failure, fuse blown (1+1
only), OCP 12 V, OVP 12 V, or fan failed.
Amber blinking Power supply warning events where the power supply continues to operate:
high temperature, high power/high current, or slow fan.
Table 4-4 IPS 4260 Specifications
Dimensions and Weight
Height 3.45 in. (87.6 cm)
Width 17.14 in. (435.3 cm)
Depth 20 in. (508 cm)
Weight 20.0 lb (9.07 kg)
Form factor 2 RU, standard 19-inch rack-mountable
Power
Autoswitching 100V to 240V AC
Frequency 47 to 63 Hz, single phase
Operating current 8.9 A
Steady state 588 W max continuous
Maximum peak 657 W
Maximum heat dissipation 648 BTU/hr
Environment
Temperature Operating +32°F to +104°F (+0°C to +40°C)
Nonoperating -104°F to +158°F (-40°C to +70°C)
Relative humidity Operating 10% to 85% (noncondensing)
Nonoperating 5% to 95% (noncondensing)
Altitude Operating 0 to 9843 ft (3000 m)
Nonoperating 0 to 15,000 ft (4750 m)