User Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Basic Set Up
- Viewing Live Video
- Advanced Viewing Set Up
- Managing an IP Camera through the Web
- Connecting to an IP Camera
- Basic Setup Window
- Advanced Setup Window
- IP Filter Window
- Users Window
- Maintenance Window
- Firmware Window
- Video Window
- Audio Window
- Mail Window
- Motion Detection Window
- Event Window
- SNMP Window
- DDNS Window
- I/O Ports Window
- RS-485 Window
- System Window
- Image Window
- Network Window
- Syslog & Log Window
- View Video Log Window
- Troubleshooting
- Streaming Video/Audio Solution
- Index
EFT DRAFT—CISCO CONFIDENTIAL
5-14
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 5 Managing an IP Camera through the Web
DDNS Window
DDNS Window
The DDNS window allows you to configure DDNS. To access this window, connect to the camera as
described in the “Connecting to an IP Camera” section on page 5-2 and then choose Applications >
DDNS.
Table 5-14 describes the options in the DDNS window.
I/O Ports Window
The I/O Ports window allows you to configure input and output ports of the camera. To access this
window, connect to the camera as described in the “Connecting to an IP Camera” section on page 5-2
and then choose Applications > I/O Ports.
Table 5-15 describes the options in the I/O Ports window.
Table 5-13 SNMP Window Options
Option Description
SNMP Enable/Disable Enable or disable the SNMP function.
System Object ID Displays the system object ID.
System Contact Enter the system contact information.
SysLocation Enter the location of the system contact.
Read Community String Enter the SNMP community string. The default is Public.
Primary Trap Receiver Enter the IP address of the primary receiver for SNMP traps.
Secondary Trap
Receiver
Enter the IP address of the secondary receiver for SNMP traps.
Table 5-14 DDNS Window Options
Option Description
DDNS Enable/Disable Enable or disable the DDNS function, as required. Enable this feature only
if you have registered for the DDNS service with a DDNS server provider.
Service Provider Choose a DDNS service provider.
Web Site Button Click this button to open a new window and connect to the web site for the
selected DDNS service provider.
Host Name Enter the domain name (Host Name) allocated to you by the DDNS server
provider.
Account Enter the login name or the e-mail address for the DDNS account.
Password Enter the password for the DDNS account.
Check WAN IP Address Set the schedule for checking if the IP address has changed. If the IP address
has changed, the DDNS server is notified.
Note If the DDNS Service provided software to perform this IP address
update or notification, do not use that software. The update is
performed by the camera.