User Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Basic Set Up
- Viewing Live Video
- Advanced Viewing Set Up
- Managing an IP Camera through the Web
- Connecting to an IP Camera
- Basic Setup Window
- Advanced Setup Window
- IP Filter Window
- Users Window
- Maintenance Window
- Firmware Window
- Video Window
- Audio Window
- Mail Window
- Motion Detection Window
- Event Window
- SNMP Window
- DDNS Window
- I/O Ports Window
- RS-485 Window
- System Window
- Image Window
- Network Window
- Syslog & Log Window
- View Video Log Window
- Troubleshooting
- Streaming Video/Audio Solution
- Index
EFT DRAFT—CISCO CONFIDENTIAL
5-11
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 5 Managing an IP Camera through the Web
Audio Window
Audio Window
The Audio window provides options for configuring the audio from a camera. To access this window,
connect to the camera as described in the “Connecting to an IP Camera” section on page 5-2 and then
choose Audio/Video > Audio.
Table 5-9 describes the options in the Audio window.
Mail Window
The Mail window provides options for configuring e-mail to which a message is sent when an event is
triggered on the camera. To access this window, connect to the camera as described in the “Connecting
to an IP Camera” section on page 5-2 and then choose Applications > Mail and FTP.
Table 5-10 describes the options in the Mail window.
Table 5-9 Audio Window Options
Option Description
Enable Audio Check this check box and select the desired audio option.
Enable Microphone
Enable Speaker
Check these check boxes to enable person in the monitoring office yo talk to
people on site while viewing images on screen.
Audio Type Select the desired audio type from the drop-down list.
Table 5-10 Mail Window Options
Option Description
Primary/Secondary SMTP Server
Primary SMTP Check this check box to identify the primary SMTP server.
SMTP Server Address Enter the IP address of the SMTP server to be used to send e-mail.
Authentication Select the desired authentication type for the SMTP server.
Account Name Enter the login name for the SMTP server.
Password Enter the password for the SMTP server.
POP Server Name Enter the name of the POP Server.
Secondary SMTP Check this check box to user a secondary SMTP server.
E-Mail Setup
Send To Enter at least 1 e-mail address. The second and third addresses are optional.
The e-mail alert is sent to the e-mail address or addresses specified here.
Show “From” as Enter the e-mail address to be shown in the From field.
Subject Enter the text to be shown as the Subject for the e-mail. The subject can
contain up to 48 alphanumeric characters.
Primary/Secondary FTP
Primary FTP Check this check box to upload an event file to the primary FTP server.
FTP Server Enter the IP address of the FTP server.










