User Manual

EFT DRAFT—CISCO CONFIDENTIAL
5-8
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 5 Managing an IP Camera through the Web
IP Filter Window
IP Filter Window
The IP Filter window provides options for configuring the IP addresses from which a camera can be
accessed. To access this window, connect to the camera as described in the “Connecting to an IP Camera”
section on page 5-2 and then choose Setup > IP Filter.
Table 5-4 describes the options in the IP Filter window.
Users Window
The Users window provides options for configuring administrators and users who can access the camera.
To access this window, connect to the camera as described in the “Connecting to an IP Camera” section
on page 5-2 and then choose Administration > Users.
Table 5-5 describes the options in the Users window.
Table 5-4 IP Filter Window Options
Option Description
Options The IP Filter feature allows administrators to control camera access by
filtering IP address. Select the desired option from the drop-down list.
Single/Range Enter an IP address or a range of IP addresses that you would like to allow
or deny access to the camera.
Table 5-5 Users Window Options
Option Description
Administrator
User Name Enter a unique name for the administrator.
The name can include only letters and numbers. The name is not case
sensitive.
Password Enter the password for the administrator.
Confirm Password Re-enter the password for the administrator.
Demo
User Name Enter a unique name for the user.
The name can include only letters and numbers. The name is not case
sensitive.
Password Enter the password for the user.
Confirm Password Re-enter the password for the user.
User List
User Name Enter a unique name for the user.
The name can include only letters and numbers. The name is not case
sensitive.
Password Enter the password for the user.