User Manual
Table Of Contents
- Contents
- Preface
- Introduction
- Basic Set Up
- Viewing Live Video
- Advanced Viewing Set Up
- Managing an IP Camera through the Web
- Connecting to an IP Camera
- Basic Setup Window
- Advanced Setup Window
- IP Filter Window
- Users Window
- Maintenance Window
- Firmware Window
- Video Window
- Audio Window
- Mail Window
- Motion Detection Window
- Event Window
- SNMP Window
- DDNS Window
- I/O Ports Window
- RS-485 Window
- System Window
- Image Window
- Network Window
- Syslog & Log Window
- View Video Log Window
- Troubleshooting
- Streaming Video/Audio Solution
- Index
EFT DRAFT—CISCO CONFIDENTIAL
5-7
Cisco Video Surveillance System IP Camera User Guide
OL-14220-01
Chapter 5 Managing an IP Camera through the Web
Advanced Setup Window
Table 5-3 Advanced Setup Window Options
Option Description
Advanced Setup
HTTP/HTTPS HTTP Alternative Port—If enabled, you can connect using either port 80 or
the secondary port. You must enter the secondary port number (1024 through
65535) in the field provided.
HTTPS Alternative Port—If enabled, you can connect using either port 80
or the secondary port. You must enter the secondary port number (1024
through 65535) in the field provided.
Note that when using a port number that is not 80, you must specify the port
number in the URL. For example, if the camera IP address is 192.168.1.100
and the secondary port is 1024, you would specify the URL for the Camera
as http://192.168.1.100:1024.
RTP/RTSP The RTSP (Real Time Streaming Protocol) is a standard for connected client
to control streaming data (MPEG-4) over the web. Enter the RTSP port
number (1024 through 65535) in the field provided. The default RTSP Port
is 554.
The RTP (Real Time Transport Protocol) is an Internet protocol for
transmitting real-time data such as audio and video.
Max RTP Data Packet field lets users limit the size of the file. Enter the
desired value 400 through 1400.
Enable Multicast If enabled, enter the data in the following fields.
Video Address Enter the address of video.
Video Port Enter an even value from 1024 to 65534.
Audio Address Enter the address of the audio.
Audio Port Enter an even value from 1024 to 65534.
Time to Live Enter a value 1 though 255 for the time to live.
UpNp
Enable Discovery If enabled, the camera broadcasts its availability through UPnP. UPnP
compatible systems such as Windows XP will then be able to detect the
presence of the camera.
Enable Traversal If enabled, HTTP connections (from your web browser or the Viewer and
Recorder utility) can use secondary port instead of port 80 (the standard
HTTP port) to access the camera.
QoS
Enable QoS Mode If enabled, the throughput level for video or audio is guaranteed through QoS
(Quality of Service).
CoS
Enable CoS Mode Check this check box if you want to use the CoS (Class of Service) feature.
Priority Select the desired option from the list.
VLAN ID Enter value from 0 to 4095.