- Cisco 1800 Series Integrated Services Router Manual

11-6

Cisco 1800 Series Routers (Modular) Hardware Installation Guide

OL-5876-03

Chapter 11 Installing and Upgrading Internal Modules in Cisco 1800 Series Routers (Modular)

Modules Internal to the Cisco 1841 Router

Figure 11-5 Removing a SODIMM

Step 3 Insert the SODIMM into the SODIMM socket, as shown in Figure 11-6.

Figure 11-6 Installing a SODIMM

Step 4 Firmly press the SODIMM into the socket until the spring-loaded clips on the socket snap over the end

of the SODIMM.

Installing an AIM

The Cisco 1841 router has the capability to support a single AIM module. To install an AIM, follow the

procedure given here.

1 Spring-loaded clips 3 SODIMM socket

2 SODIMM

103155

1 SODIMM 3 Spring-loaded clips

2 Insert and rotate into socket.

103154