- Cisco 1800 Series Integrated Services Router Manual

CHAPTER
6-1
Cisco 1800 Series Routers (Modular) Hardware Installation Guide
OL-5876-03
6
Cable Connection Procedures for Cisco 1800
Series Routers (Modular)
This chapter describes how to connect your Cisco 1800 series integrated services router (modular) to a
power source and to networks and external devices. It includes the following sections:
• Power Connections, page 6-1
• Connecting WAN and LAN Cables, page 6-2
• Connecting to a Console Terminal or Modem, page 6-3
For cable information and specifications, see the “Cable Information and Specifications for Cisco 1800
Series Routers (Modular)” document.
Note To see translations of the warnings that appear in this publication, see the Regulatory Compliance and
Safety Information for Cisco 1840 Routers.
Power Connections
Warning Read the installation instructions before connecting the system to the power source. Statement 1004.
Note The installation must comply with all required electrical codes applicable at the installation site.
Connect your router to a 15 A, 120 VAC (10 A, 240 VAC) circuit with overcurrent protection.
Note The input voltage tolerance limits for AC power are 85 and 264 VAC.
Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that
the protective device is rated not greater than: 15A, 120VAC (10A, 240VAC). Statement 1005