Installation Guide

MeaningColorLED Message
Type
There has been a DRAM memory test failure
RedBoot loader
errors
There has been a FLASH file system failureBlinking Red and Amber
This sequence may indicate any of the following:
• Environment variable failure
• Bad MAC address
• Ethernet failure during image recovery
• Boot environment failure
• No Cisco image file
• Boot failure
Blinking Red and Off
There has been a software failure; a disconnect then reconnect
of the unit power may resolve the issue
RedAP OS errors
This is a general warning of insufficient inline power.Cycling through Red, Green,
Amber, and Off
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
64
Configuring and Deploying the Access Point
Checking the Access Point LEDs