Installation Guide

5/16-18 x 1.25 inchBolt5SMK Lower Bracket2
Cable Clamp65/16-18 x 0.75” Bolt3
Figure 42: Assembling the AP to the SMK and Solar Shield
M8 split lock washer4SMK Bracket Assembly1
M8 flat washer5Solar Shield2
8-32 x 0.62 inch Phillips Pan Head Screw6M8 x 16 mm Button head hex bolt3
To mount the AP horizontally onto a cable strand, follow these steps:
Before you begin
Ensure that you have the following materials before strand mounting the AP:
Table 10: Materials Needed for Mounting the AP using AIR-MNT-STRAND1= Kit
Supplied in the
Kit?
Materials Required
YesStrand Mount Kit (including hardware)
YesSolar Shield Cover
Yes(2) M8 x 16 mm Button head hex bolts
Yes(2) M8 split lock washer
Yes(2) M8 flat lock washer
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
46
Installation Overview
Strand Mounting the AP