Installation Guide

Figure 37: Pole Mounted Horizontal Kit (AIR-MNT-HORZ1=)
L-Bracket1
Solar Shield2
(4) M6 x 12–mm Hex-head Bolts3
(4) 8-32 x 0.62” Phillips Pan Head Screw4
(2) Adjustable Band Clamps 2 to 5 inch (51 to 127 mm) Dia. passing through the bracket slots5
Before you begin
Ensure that you have the following materials before beginning to mount the AP horizontally to a pole:
Table 9: Materials Needed for Mounting the AP using AIR-MNT-HORZ1= Kit
Supplied in the
Kit?
Materials Required
YesWall/Pole Mount L-Bracket
YesSolar Shield
Yes(4) M6 x 12-mm Hex-head Bolts
Yes(2) Adjustable Band Clamps 2 to 5 inch (51 to 127 mm) Dia
Yes(4) 8-32 x 0.62” Phillips Pan Head Screw
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
42
Installation Overview
Pole Mounting the AP with Horizontal Kit