Installation Guide

Figure 25: Mounting Bracket for Wall and Pole Mounting
One of four keyhole slots to mount the AP.1
One of four slots for steel band clamps, used for pole mounting only.2
Bracket mount holes for fastening bracket to the wall. You can use bolts of up to 1/4” or 6 mm in
diameter.
3
Figure 26: Mounting Bracket Dimensions
Before you begin
Ensure that you have the following materials before beginning to mount the AP to a wall:
Table 2: Material Required to Mount Access Point to a Wall using AIR-MNT-VERT1= Kit
Supplied in the
Kit?
Materials Required
YesGround lug and screws (provided with the access point)
YesWall Mount Bracket
YesFour M6 x 12–mm Hex-head Bolts
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
26
Installation Overview
Vertically Mounting the AP to a Wall