Installation Guide

CHAPTER 3

Unpacking Your Access Point

• Package Contents, on page 15

• Unpacking the Access Point, on page 15

• Optional Tools and Hardware from Cisco, on page 16

• Cisco Orderable Accessories, on page 16

• Preinstallation Checks and Installation Guidelines, on page 17

• Typical Access Point Installation Components, on page 18

Package Contents

Each AP package contains the following items:

• One C9124AXI or C9124AXD Outdoor AP

• Ground lug and screws with lock washers

• RJ45 Ethernet port termination plug

• Weatherization tape and anticorrosion sealant

• Cisco product documentation and pointer card

Unpacking the Access Point

To unpack the AP, follow these steps:

Procedure

Step 1 Unpack and remove the AP and the accessory kit from the shipping box.

Step 2 Return the packing material to the shipping container and save it for future use.

Step 3 Verify that you have received following items:

• The access point

• Accessory kit (Ethernet port termination plug, ground lug kit)

Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide