Installation Guide

Connectors and Ports on the Base
Figure 1: Models C9124AXI and C9124AXD Base Connectors and Ports
1 Gig PSE (PoE-OUT) Ethernet Port3SFP port for uplink
1
. The SFP port only
supports DC power IN.
If the port is not being used, do not remove
the covering plug. Otherwise, it might lead to
water leaking into the AP
1
Reset / Status LED42.5G mGig PD (PoE-IN) Ethernet port2
1
Use the SFP port or the Gigabit Ethernet port as the uplink port. However, if you do this, you cannot
use the Ethernet port as a local client port. Connectors on the Sides
Cisco Catalyst 9124AX Series Outdoor Access Point Hardware Installation Guide
6
Hardware Features
Connectors and Ports