User manual

Software Authentication Manager Commands on Cisco IOS XR Software
show sam sysinfo
SR-226
Cisco IOS XR System Security Command Reference
show sam sysinfo
To display current configuration settings for the Software Authentication Manager (SAM), use the show
sam sysinfo command in EXEC mode.
show sam sysinfo
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show sam sysinfo command to determine the configuration settings of the SAM.
The display shows the status of the SAM, current prompt interval setting, and current prompt default
response.
Examples The following sample output is from the show sam sysinfo command:
RP/0/RP0/CPU0:router# show sam sysinfo
Software Authentication Manager System Information
==============================================
Status : running
Prompt Interval : 10 sec
Prompt Default Response : NO
Table 21 describes the significant fields shown in the display.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.