User manual

Software Authentication Manager Commands on Cisco IOS XR Software
show sam package
SR-223
Cisco IOS XR System Security Command Reference
show sam package
To display information about the certificate used to authenticate the software for a particular package
installed on the networking device, use the show sam package command in EXEC mode.
show sam package package-name
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show install all command to display the installed location and name of the software
package—for example, mem:ena-base-0.0.0 or disk1:crypto-exp-lib-0.4.0—and then use the show sam
package command to display information about the certificate used to authenticate that installed
package. The show sam package command displays the same information as the show sam certificate
detail location certificate-index command.
Examples The following sample output is from the show sam package command:
RP/0/RP0/CPU0:router# show sam package mem:12k-rp-1.0.0
------------------------------------------------------------
Certificate Location :mem
Certificate Index :1
Certificate Flag :VALIDATED
----------------------- CERTIFICATE ------------------------
Serial Number :01:27:FE:79:00:00:00:00:00:05
Subject Name :
cn=Engineer code sign certificate
Issued By :
cn=Code Signing Server Certificate Authority,o=Cisco,c=US
package-name Location of the software package, including the memory device (disk0:, disk1:,
mem:, and so on) and the file system path to the file. Use the show install all
command to display the Install Manager package name and location information.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.