User manual

Software Authentication Manager Commands on Cisco IOS XR Software
show sam certificate
SR-216
Cisco IOS XR System Security Command Reference
show sam certificate
To display records in the certificate table, use the show sam certificate command in EXEC mode.
show sam certificate {detail location certificate-index | summary {all | location}}
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show sam certificate command when you want to display all the certificates stored in the
system. Attributes are certificate number, certificate flag, serial number, subject name, issued by,
version, issuing algorithm, not-before and not-after dates, public key, and signature.
To get the certificate number, use the show sam certificate summary all command. When used with the
summary keyword, the all keyword displays selected attributes for all the entries in the table.
When used with the summary keyword, the location argument displays selected attributes for only the
certificates stored in a specific location. Use one of the following: root, mem, disk0, disk1, or other
flash device on router.
detail Displays all the attributes for the selected table entry (specified by the
certificate-index argument).
location Specifies the certificates stored in a specific location. Use one of the following:
root, mem, disk0, disk1, or other flash device on router.
certificate-index Index number for the entry, in the range from 1 to 65000.
summary Displays selected attributes for entries in the table.
all Displays selected attributes for all the entries in the table.
location Displays selected attributes for only the certificates stored in a specific location.
Use one of the following: root, mem, disk0, disk1, or other flash device on
router.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.