User manual
Table Of Contents
- SIP Subscribers
- SIP Phone Initialization
- Provisioning a SIP Subscriber
- SIP Registration and Security
- SIP User Authentication
- SIP Subscriber Calls
- Provisioning Session Timers for SIP Subscribers
- SIP Timer Values for SIP Subscribers
- Diversion Indication for SIP Subscribers
- Comparison of SIP-Based Features and MGCP-Based Features
- Cisco BTS 10200 Softswitch-Based Features
- Summary
- Call Forwarding
- Calling Name and Number Delivery
- Caller ID Delivery Suppression
- Customer Access Treatment
- Direct Inward Dialing
- Direct Outward Dialing
- Do Not Disturb
- E.164 and Centrex Dialing Plan (Extension Dialing)
- Operator Services (0-, 0+, 01+, and 00 Calls)
- User-Level Privacy
- Vertical Service Code Features
- Voice Mail
- Jointly Provided Features
- Phone-Based Features

2-23
Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0
OL-12397-13
Chapter 2 SIP Subscribers
Cisco BTS 10200 Softswitch-Based Features
E.164 and Centrex Dialing Plan (Extension Dialing)
The system supports E.164 and Centrex Dialing Plan (extension dialing) addressing from SIP
subscribers served by the local BTS 10200.
The SIP phone’s dial plan must be configured so that it considers the number of digits in the Centrex
group. Centrex dialing can be provisioned within a range of 1 through 7 digits. Each Centrex group
should have its own separate dial plan.
Note The CDP feature should be assigned to every Centrex category user.
Example 2-1 A SIP URL with E.164 Addressing
sip:4695551234@rcdn.cisco.com;user=phoneA sip:50603@rcdn.cisco.com;user=phone
Additional information on this feature is provided at the following links.
Operator Services (0-, 0+, 01+, and 00 Calls)
There is no Cisco BTS 10200 Softswitch subscriber-specific provisioning involved for Operator
Services.
Additional information on this feature is provided in the “Operator Services” section in the
Cisco BTS 10200 Softswitch Network and Subscriber Feature Descriptions document
User-Level Privacy
User-level privacy is provisioned in the Subscriber table.
Setting the privacy parameter to user directs the system to apply the user-provided privacy information.
This setting (privacy=user) applies only to SIP endpoints that are capable of including privacy
information.
Vertical Service Code Features
This section explains how to plan vertical service codes (VSCs) in a network with SIP subscribers, and
lists the VSC-enabled features.
Provisioning Procedure
Feature Behavior (Feature Description and
Handset Provisioning)
“Provisioning a Centrex Group” section in the
Cisco BTS 10200 Softswitch Provisioning Guide
Cisco BTS 10200 Softswitch Dial Plan document
“Numbering Plans and Dialing Procedures”
section in the Cisco BTS 10200 Softswitch
Network and Subscriber Feature Descriptions
document
“Features for Centrex Subscribers Only” section
in the Cisco BTS 10200 Softswitch Network and
Subscriber Feature Descriptions document