Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 6Managing IP Addresses by Using DNS
About Managing IP Addresses
'%
Basic Dial NMS Implementation Guide
To create an IP tracker web page, follow these steps:
Step 1
Become familiar with the layout of an IP tracker web page. In Figure 24, the subnet column shows a list
of all managed zones. The assignment
column describes the purpose of each zone.
Figure 24 IP Tracker Web Page