Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 5Setting Up a Web Portal for the Dial NMS
About HTTP Access to the CLI
&&
Basic Dial NMS Implementation Guide
Step 3
Post the HTML page that you created in Step 2 to a web server.
Table 28 Call State Commands
show modem show caller show users
show modem call-stats show caller ip show dialer
show modem ? show caller timeout show dialer map
show caller ?
Table 29 Debugging Commands
show logging debug isdn q931 debug aaa
authentication
clear counters debug modem debug aaa
authorization
clear logging debug ppp negotiation debug aaa accounting
show debug debug ppp authentication debug aaa per-user
undebug all debug dialer debug vtemplate
debug dialerpacket debug vprofile