Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 5Setting Up a Web Portal for the Dial NMS
About a Web Portal
&"
Basic Dial NMS Implementation Guide
<td><a href="http://172.21.10.1">travis-nas-01</a></td>
<td><a href="telnet://172.21.10.1">172.21.10.1</a></td>
<td><a href="telnet://172.21.101.250:2001">travis-oob-01:2001</a></td>
<td>5800</td>
<td>Dial POP #1</td>
</tr>
</table>
</body>
</html>
Step 4
Post the device linker web page to a WWW server in the NOC.
Figure 20 A Device Linker Management Page
Table 23 Functions and Parameters for Designing a Device Linker Web Page
Function Formula Example
OOB console access telnet://termserver-ip:20XX telnet://172.21.101.250:2001
Basic IP access telnet://ip-address telnet://172.21.10.1
IOS HTTP access http://ip-address http://172.21.10.1