Basic Dial NMS Implementation Guide
Table Of Contents
- Preface
- Overview of Basic SNMP Building Blocks
- Network Design for a DialNMSCase Study
- Dial MIBs and OIDs Used in the Case Study
- Task 1—Enabling SNMP in a Cisco IOS Device
- Task 2— Exploring SNMP Capabilities by Using UCD-SNMP
- Task 3—Using MRTG to Monitor and Graph Traffic Loads
- Task 4—Using Syslog, NTP, and Modem Call Records to Isolate and Troubleshoot Faults
- Task 5—Setting Up a Web Portal forthe DialNMS
- Task 6—Managing IP Addresses by Using DNS
- Task 7—Using HP OpenView to Create the SNMP Framework
- Task 8—Using CiscoWorks 2000 Resource Manager Essentials
Task 3Using MRTG to Monitor and Graph Traffic Loads
How to Inspect and Interpret Data
$
Basic Dial NMS Implementation Guide
#---------------------------------------------------------------------------------------
# purpose: DS0s and Analog
#---------------------------------------------------------------------------------------
Target[travis-nas-01_DS0ANALOG]:
1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.2.0:5urf5h0p@travis-nas-01
MaxBytes1[travis-nas-01_DS0ANALOG]: 200
MaxBytes2[travis-nas-01_DS0ANALOG]: 200
Title[travis-nas-01_DS0ANALOG]: DS0s and Analog in Use
PageTop[travis-nas-01_DS0ANALOG]: <H2>DS0s and Analog in Use</H2>
<TABLE>
<TR><TD>Device:</TD><TD>travis-nas-01</TD></TR>
<TR><TD><a href="/mrtg/mrtg.html">HOME</a></TD></TR>
</TABLE>
Options[travis-nas-01_DS0ANALOG]: gauge
#----------------------------------------------------------------------------------------
------
# purpose: DS0s and SerialX:Y
#----------------------------------------------------------------------------------------
------
Target[travis-nas-01_DS0SERIAL]:
1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.3.0:5urf5h0p@travis-nas-01
MaxBytes1[travis-nas-01_DS0SERIAL]: 200
MaxBytes2[travis-nas-01_DS0SERIAL]: 200
Title[travis-nas-01_DS0SERIAL]: DS0s and SerialX:Y in Use
PageTop[travis-nas-01_DS0SERIAL]: <H2>DS0s and SerialX:Y in Use</H2>
<TABLE>
<TR><TD>Device:</TD><TD>travis-nas-01</TD></TR>
<TR><TD><a href="/mrtg/mrtg.html">HOME</a></TD></TR>
</TABLE>
Options[travis-nas-01_DS0SERIAL]: gauge
#----------------------------------------------------------------------------------------
------
# purpose: DS0s and Sw56
#----------------------------------------------------------------------------------------
------
Target[travis-nas-01_DS0Sw56]:
1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.10.0:5urf5h0p@travis-nas-01
MaxBytes1[travis-nas-01_DS0Sw56]: 200
MaxBytes2[travis-nas-01_DS0Sw56]: 200
Title[travis-nas-01_DS0Sw56]: DS0s and Sw56 in Use
PageTop[travis-nas-01_DS0Sw56]: <H2>DS0s and Sw56 in Use</H2>
<TABLE>
<TR><TD>Device:</TD><TD>travis-nas-01</TD></TR>
<TR><TD><a href="/mrtg/mrtg.html">HOME</a></TD></TR>
</TABLE>
Options[travis-nas-01_DS0Sw56]: gauge
#----------------------------------------------------------------------------------------
------
# purpose: cpmISDNCallsRejected and cpmModemCallsRejected
#----------------------------------------------------------------------------------------
------
Target[travis-nas-01_callrejects]:
1.3.6.1.4.1.9.10.19.1.2.1.0&1.3.6.1.4.1.9.10.19.1.2.2.0:5urf5h0p@travis-nas-01
MaxBytes1[travis-nas-01_callrejects]: 200
MaxBytes2[travis-nas-01_callrejects]: 200
Title[travis-nas-01_callrejects]: travis-nas-01 cpmISDNCallsRejected and
cpmModemCallsRejected
PageTop[travis-nas-01_callrejects]: <H2>cpmISDNCallsRejected and
cpmModemCallsRejected</H2>
<TABLE>
<TR><TD>Device:</TD><TD>travis-nas-01</TD></TR>